Jerith Aluminum Fences of Distinction
| There are a wide variety of Jerith fence styles available in three colors and several heights. You can be sure that there is a Jerith fence to enhance the beauty of your home, pool or yard. | |
| Residential Fence Styles | |
|
|
|
| Style #101 is our traditional wrought iron design. The points of the pickets are even across the top of the section. |  |
 |
Style #100 is a variation of #101 with staggered picket points for something a little more distinctive. |
| Style #111 is a version of Style #101 that is constructed to accept |  |
 |
Style #202 is a more modern design with a smooth rail on top rather than exposed picket points. |
| Style #200 is a modification of #202 which combines the safety of a top rail with the traditional look of pointed pickets below the rail. |  |
 |
Style #401 is similar to Style #101 but with a 1-5/8" space between the pickets below the top rail. This narrow spacing gives added safety and security by preventing footholds and keeping animals from squeezing through the fence. |
| Style #402 is a smooth top version of #401 for those who do not want exposed points on their fence. The pickets between the top two rails are spaced less than 4" apart for a more stylish look. |  |
 |
Lexington has a distinguished "Old World" wrought iron design with elegant curves connecting the pickets. This style is available with either standard points or finials centered inside each arch. |
| Concord is similar to the Lexington design, except that there are pickets between each curve, as well as inside the arch. Again, either standard points or finials may be used. |  |
 |
Ovation is a simple design which uses larger rails and pickets to meet most swimming pool enclosure codes without sacrificing strength. No pickets are exposed either above or below the rails for added safety. In addition, all Ovation style gates are equipped with a pool safety latch, similar to the one shown. This latch has a built-in keylock and is magnetic triggered for reliable latching every time. |
| Regency Fence Styles These sections have larger components that allow these fences to be 33% stronger than our other Residential sections. This is the only series with rings available as an option. |
No Picture Available |
 |
Buckingham is a traditional wrought iron design with pointed pickets much like our Style #101. Unlike #101 though, the pickets do not extend below the bottom rail. Larger components are used to fabricate this fence for both strength and a more stately appearance. |
| Buckingham Plus has all of the features of the Buckingham fence, as well as rings installed between the top two rails. |  |
 |
Kensington is another classic wrought iron design with decorative finials on the tops of the pickets. Similar to Style #111, but the pickets end at the bottom rail, so they do not protrude below. The same larger components are used in this style as the other Regency designs. A “Plus” version of Kensington is also available with rings between the top two horizontal rails. |
| Windsor is the less traditional version of the Buckingham with a smooth top rail, similar to Style #202. Again, no pickets extend below the bottom rail. The larger components give an regal look to this fence. |  |
 |
Windsor Plus is a variation of the Windsor style with rings between the top two rails. |
|
|
|
| Dimensions and Specifications | |
| Component Sizes |  Residential Strength |
Ovation - Regency |
Industrial Strength |
| Pickets | 5/8"
sq. x .050" thick |
3/4
" sq. x .050" thick |
1"
sq. x .062" thick |
| Rails:
Top Walls Side Walls |
1"
x .055" thick 1" x .082" thick |
1"
x .055" thick 1 1/2 " x .082" thick |
1
5/8 " x .070" thick 1 5/8 " x .100" thick |
| Standard Posts | 2"
sq. x .060" thick |
2"
sq. x .060" thick |
2
1/2 " sq. x .075" thick |
| Gate Posts | 2"
sq. x .125" thick 4" sq. x .125" thick |
2"
sq. x .125" thick 4" sq. x .125" thick |
4"
sq. x .125" thick 6" sq. x .125" thick |
| Spacing Between Pickets | 3
13/16" (1 5/8 " for 400 series) |
3 31/32" | 4" (1 1/2 " for 400 series) |
| Post Spacing | 72 1/2" on center | 72" on center | 71 1/2" on center |
| Heights Available* | 36", 48", 60", 72", 54"*, 57"* | 36", 48", 60", 72", 54"* | 48", 60", 72", 84", 96" |
| Standard Colors | Black, White, Bronze | Black, White, Bronze | Black, White, Bronze |
| Weight Supported | 350+ lbs. per section | 350+ lbs. per section | 1,000+ lbs. per section |
| *Residential fence is also available in a 54" height as a modified Style #200 and #202, and a 57" height as a modified Lexington and Concord to meet most pool codes. Regency fence is available in a 54" height in Windsor and Windsor Plus Styles. Ovation is only 48" high. | |||
| Accessories | |
|
Our cast aluminum decorative accessories give any Jerith fence a distinctive appearance. Choose from a selection of scrolls, finials and ball caps to create a custom look that will add an extra touch of elegance to your fence. These castings are available in a black, white, bronze, or gold finish to enhance any fence or gate. The combinations of scrolls, finials and ball caps are almost unlimited. While these accessories may look like cast iron, their aluminum construction prevents them from rusting. Like all Jerith products, their FencCoat Finish is covered by our Lifetime Warranty. So, enjoy the beauty of a custom wrought iron fence with the maintenance-free ease of aluminum - only from Jerith. |
|
| Gates | |
| All Jerith fence styles have matching gates that are constructed with a welded frame. By building the gates this way, they can hold a 250 pound load without collapsing! No other aluminum gate can make this claim. | |
 |
Style #202 Gate Our walk gates are self-closing and self-latching. They are available in several standard widths from 36" up to 72". In addition, our Regency gates are made up to 8 feet wide, while our Industrial gates can be fabricated up to 15 feet in length. No other gate can match the quality and strength found in a Jerith gate! |
| Style #200 Accent Gate To differentiate your walk gate from the rest of your fence, you may want to consider our exclusive Accent™ Gates. These attractive gates enhance our standard designs with gently arched top rails. They are completely welded with no bracing to interfere with the appearance of their curves. Accent Gates are made to accompany most of our fence styles in either a 3’ or 4’ width. |  |
|
Style #111 Estate Gate A Jerith Estate Gate will create an truly impressive entrance to your home. These beautifully arched double gates really show off your “Estate”. A pair of these gates can span up to a 20’ opening. They can arch either upward or downward, and are offered in Style #101, #111, or #202. These gates are constructed from larger aluminum components that are welded at every joint. The gate height increases by one foot from the lowest side of the gate to the highest side to create a dignified presence that will distinguish your entryway! |
